| Studiju veids |
maģistra profesionālās studijas |
| Studiju programmas nosaukums |
Viedās elektroniskās sistēmas |
| Nosaukums |
Joslas filtrs 5G telekomunikāciju sistēmām |
| Nosaukums angļu valodā |
Bandpass Microstrip Filter for 5G Communication Systems |
| Struktūrvienība |
13300 Mikroviļņu inženierijas un elektronikas institūts |
| Darba vadītājs |
Jānis Semeņako |
| Recenzents |
Deniss Kolosovs |
| Anotācija |
In this thesis, a microstrip bandpass filter (BPF) with the central frequency in 3400-3600 MHz
band for 5G wireless communications in India is designed and fabricated. The filter under
investigation is composed of a number of U-shaped resonators. The bandwidth of filter is 100
MHz and all resonators are synchronously tuned. The resonant frequency of the resonators, the
coupling between them, as well as input and output coupling coefficients are computed by
means of the coupling matrix method procedure The frequency response of the filter obtained
and optimized through the use of Ansys HFSS software. Filter specifications are as follows:
band center frequency 3.5 GHz, bandwidth 100 MHz, input and output impedance is 50. The
obtained transfer characteristic corresponds to the Chebyshev filter response. However, further
optimization is required as the minimum attenuation in the passband was not reached using the
coupling matrix method only.
The work contains 113 pages, 124 figures |
| Atslēgas vārdi |
HairPin filtrs, augstas frekvences, mikroviļņu krāsns |
| Atslēgas vārdi angļu valodā |
HairPin Filter, high frequency, Microwave |
| Valoda |
eng |
| Gads |
2021 |
| Darba augšupielādes datums un laiks |
02.06.2021 14:45:04 |
