| Form of studies |
Professional Master |
| Title of the study programm |
Smart Electronic Systems |
| Title in original language |
Joslas filtrs 5G telekomunikāciju sistēmām |
| Title in English |
Bandpass Microstrip Filter for 5G Communication Systems |
| Department |
Institute of Microwave Engineering and Electronics |
| Scientific advisor |
Jānis Semeņako |
| Reviewer |
Deniss Kolosovs |
| Abstract |
In this thesis, a microstrip bandpass filter (BPF) with the central frequency in 3400-3600 MHz
band for 5G wireless communications in India is designed and fabricated. The filter under
investigation is composed of a number of U-shaped resonators. The bandwidth of filter is 100
MHz and all resonators are synchronously tuned. The resonant frequency of the resonators, the
coupling between them, as well as input and output coupling coefficients are computed by
means of the coupling matrix method procedure The frequency response of the filter obtained
and optimized through the use of Ansys HFSS software. Filter specifications are as follows:
band center frequency 3.5 GHz, bandwidth 100 MHz, input and output impedance is 50. The
obtained transfer characteristic corresponds to the Chebyshev filter response. However, further
optimization is required as the minimum attenuation in the passband was not reached using the
coupling matrix method only.
The work contains 113 pages, 124 figures |
| Keywords |
HairPin filtrs, augstas frekvences, mikroviļņu krāsns |
| Keywords in English |
HairPin Filter, high frequency, Microwave |
| Language |
eng |
| Year |
2021 |
| Date and time of uploading |
02.06.2021 14:45:04 |
